(0)
£0.00
Previous Image
Next Image
Sash
Line 6 DT50 50 Watt Valve Amplifier Head
Hover over image to zoom.
Line 6

Line 6 DT50 50 Watt Valve Amplifier Head

  code:Used-84
£499.00 (FREE UK Delivery)
1 in Stock Now   |  Usually dispatched within 24 hours
Add to Bag Advanced Collect in Store
This product has been added to your basket...
  • Continue Shopping
  • Checkout
  • Pre-Owned; Very good condition. One small mark on the tolex at the rear of the amp
  • Bogner-Designed
  • 2-Channel Selection with 4 Amp Voicings
  • Pentode/Triode Modes for Loud/Quiet Settings
  • Switchable Class A / Class AB Amp Settings

We have here a pre-owned Line 6 DT50 50-Watt amplifier head. It is in very good condition and has been part-exchanged by a very good customer of ours. The amplifier includes its original box, but please note that its instruction manual is absent.

Description

Find your voice.
Classic American clean, chimey and crunchy English tones, modern high-gain distortion - all great amplifiers are based on one of these four celebrated amp voicings. DT50 has them all, and the four-way Voicing switch on the front panel is your speed-dial to each one.

Behind each Voicing is the perfect recipe of dynamic analog circuitry (which includes tube configuration and negative feedback loop topology), and HD amp modeling technology (which fuels the preamp and tone stack). The choice is yours.

DT50/DT25 v2.0 firmware lets you create original amp tones by pairing your choice of 30 HD preamps with any combination of dynamic topologies (negative feedback loop, operating class, power tube mode and more) within Reinhold Bogner's reconfigurable tube power amp.

  • Voicing I: American clean. High amount of negative feedback for a tight sound that's reminiscent of 60s-style American cleans.
  • Voicing II: English crunch. Medium amount of negative feedback for a looser tone that echoes classic English breakup.
  • Voicing III: English chime. Zero negative feedback for an open, dynamic feel.
  • Voicing IV: Modern high-gain. Low amount of negative feedback (and added low-frequency resonance).

Switchable analog components.
Each Voicing can become a classic powerhouse or totally customized thanks to tube amp guru Reinhold Bogner's uniquely flexible design. The (2) 12AX7 preamp and 50W, (2) EL34 power section offer easy reconfiguration of operating class (Class A/Class AB) and power tube mode (Pentode/Triode) for a wide range of feels and tones that can be added to each Voicing: modern or vintage, tight or dynamic.

Operating Class

Class A Switched to Class A, DT50 runs at 25 watts and is cathode biased. The feel is open and dynamic with greater touch sensitivity.

Class AB Switched to Class AB, DT50 runs at 50 watts and is fixed biased. This produces a tighter feel with more headroom, which is perfect for louder clean tones.

  • Power Tube Mode
  • Pentode Big, loud and clear for commanding tones.
  • Triode Quieter, rounder and darker with a more vintage-style sound.

Time-tested Recipes for Perfect Tones

  • American clean. Voicing I, Class AB, Pentode.
  • English crunch. Voicing II, Class AB, Pentode.
  • English chime. Clean chime: Voicing III, Class A, Pentode. Vintage vibe: Voicing III, Class A, Triode.
  • Modern high-gain. Voicing IV, Class AB, Pentode.

Diver down.
State-of-the-art HD modeling technology goes deeper than modeling ever has and fully integrates into Reinhold Bogner's power section. The two technologies combine and deliver a truly unique and powerful playing experience available only from DT50 amplifiers.

Low-volume mode.
HD modeling technology really comes alive in low-volume mode. Perfect for recording or quieter gigs, low-volume mode lets the HD modeling technology provide both preamp and power amp tones. You can perform with all the grit and gain you need without the volume that normally comes with it.

Specification

  • Advanced HD modeling technology
  • Reinhold Bogner's most flexible tube design
  • (2) 12AX7 preamp, (2) EL34 power amp (25W/50W)
  • Simple and straightforward 2-channel design
  • Each channel: Drive, Bass, Mid, Treble, Presence, Reverb, Channel Volume
  • Master volume
  • High and Low inputs
  • Reconfigurable analog components (Class A/Class AB; Pentode/Triode)
  • Complete, one-touch analog reconfiguration (via Channel select switch)
  • Low-power mode
  • MIDI in and out
  • L6 LINK in/thru connection for POD HD integration
  • Footswitch jack for channel switching
  • Serial effect loop with level control
  • XLR direct out with cabinet simulation and ground lift switch
  • 4, 8 and 16-ohm speaker outs
  • DT50/DT25 v2.0 firmware expands the HD preamp count from four to 30, lets you configure your own custom voicings, and more

Please contact us for more information.

sales@soundaffectsmusic.com

0151 6650777

  • Hassle Free 7-Day Returns
  • FREE Delivery on Orders Over £50*
  • Order before 2pm for Next Working Day Delivery**
  • Express European Delivery Available
  • All Deliveries Fully Tracked And Insured

Not rated yet
Be the first to review Line 6 DT50 50 Watt Valve Amplifier Head. Write a review ›